The TOYO model brings a new dimension to your shop floor. The V-shaped die clamping unit allows high-speed ejector realize high-cycle operation. Its design increases horizontal tie-bar spacing to accommodate one-size larger dies. The extremely sharp acceleration and deceleration of the injection unit make the one of the best of its class. The double nozzle-touch mechanism prevents inclination and instability of the stationary die plate. The user-friendly control system allows all-in-one menu screen for instant access to any screen. The shock-free motion control is an additional feature for stable, continuous moulding.
TOYO developed PLASTAR Grease and lubricant-saving design realize almost 90% reduction of grease consumption. Power consumption has been greatly reduced especially for large size machines. A wide range of screws developed with TOYO's see-through heat barrel technology can handle a variety of resins. The SRC-II metering system ensures uniform metering density. The SRC-III metering system prevents
| Injection | Screw diameter | mm | 68 | 75 | 83 | 83 | 90 | 100 | 100 | 110 | 110 | 120 | ||
| Injection stroke | mm | 306 | 375 | 420 | 450 | 500 | 500 | 550 | ||||||
| Theoretical injection capacity | cm 3 | 1111 | 1656 | 2028 | 2272 | 2863 | 3534 | 3927 | 4752 | 4752 | 6220 | |||
|
Standard |
Injection unit | - | K600D | L750*2 | M750D | N1100D | ||||||||
| Injection rate | cm 3/s | 654 | 795 | 974 | 920 | 1081 | 1335 | 1178 | 1425 | 1425 | 1696 | |||
| Max. injection speed | mm/s | 180 | 170 | 150 | 150 | |||||||||
| Max. injection pressure | MPa | 215.6 | 176.4 | 147.0 | 215.6 | 186.2 | 151.9 | 186.2 | 151.9 | 171.5 | 143.0 | |||
| Max. injection holding pressure | MPa | 196.0 | 156.8 | 127.4 | 196.0 | 166.6 | 137.2 | 166.6 | 137.2 | 154.8 | 129.3 | |||
|
High-pressure |
Injection unit | - | - | - | - | - | ||||||||
| Injection rate | cm 3/s | - | - | - | - | |||||||||
| Max. injection speed | mm/s | - | - | - | - | |||||||||
| Max. injection pressure | MPa | - | - | - | - | |||||||||
| Max. injection holding pressure | MPa | - | - | - | - | |||||||||
|
High-speed |
Injection unit | - | - | - | - | - | ||||||||
| Injection rate | cm 3/s | - | - | - | - | |||||||||
| Max. injection speed | mm/s | - | - | - | - | |||||||||
| Max. injection pressure | MPa | - | - | - | - | |||||||||
| Max. injection holding pressure | MPa | - | - | - | - | |||||||||
| Recovery rate (PS) | kg/h | 225 | 297 | 397 | 337 | 450 | 612 | 576 | 756 | 614 | 780 | |||
| Screw revolution speed | min -1 | 200 | 170 | 160 | 130 | |||||||||
| Heater capacity | kW | 24.8 | 31.2 | 38.8 | 38.8 | 49.4 | 53.4 | 53.4 | 61.4 | 61.4 | 72.1 | |||
| Nozzle pressing force | kN | 39.0 | 39.0 | 39.0 | 58.8 | |||||||||
| Clamping | Clamping system | - | Double toggle | |||||||||||
| Clamping force | t | 850 | ||||||||||||
| Clamping stroke | mm | 1000 | ||||||||||||
| Min. mold height | mm | 450 | ||||||||||||
| Max. mold height | mm | 1000[1100] | ||||||||||||
| Tie bar clearance (H×V) | mm | 1145x1145 | ||||||||||||
| Die plate size (H×V) | mm | 1540x1540 | ||||||||||||
| Ejector force | kN | 177.0 | ||||||||||||
| Ejector stroke | mm | 280 | ||||||||||||
| Others | Mold height motor output | kW | 1.5 | |||||||||||
| Nozzle touch motor output | kW | 0.4 | 0.75 | |||||||||||
| Machine dimension (L) | mm | 10446 | 10446 | 10645 | 10645 | 10877 | 11374 | 11676 | ||||||
| Machine dimension (WxH) | mm | 2417x2490 | 2417x2490 | 2417x2490 | 2417x2532 | |||||||||
| Power Source | - | Three-phase AC200V/200,220V+/-10% 50Hz/60Hz | ||||||||||||
| Main breaker capacity | A | 400 | 400 | 400 | 600 | |||||||||
| Total electric capacity | kVA | 98 | 127 | 133 | 161 | |||||||||
| Cable size | mm 2 | 150[60] | 200[100] | 200[100] | 250[100] | |||||||||
| Machine weight | t | 37.6 [Inj:6.7t,Clamp:30.9t] | 39.7 [Inj:8.8t,Clamp:30.9t] | 39.9 [Inj:9.0t,Clamp:30.9t] | 41.9 [Inj:11t,Clamp:30.9t] | |||||||||
Check other products
Toyo Si-100-6
Toyo Si-350-6
Toyo Si-950-6