Back
Two-platen injection moulding machine
Download technical data

Tederic DH7000/i91600
clamping force: 7000 t

Huge mold capacity - modularized design for moving cylinder.
High rigidity and long platen shoes structure.
High rigidity clamping machine frame - independence and good rigid fixed supporting board avoid platen lean
Pipeline layout in mode locked part.
High-performance control panel with humanized design touchscreen.
Inject | Screw diameter | mm | 230 | 240 | 250 |
Screw L/D ratio | L/D | 26.1 | 25.0 | 24.0 | |
Shot size (theoretical) | cm3 | 53139 | 57861 | 62783 | |
Injection weight | g | 48357 | 52653 | 57132 | |
oz | 1705.74 | 1857.28 | 2015.27 | ||
Injection pressure | Mpa | 172.3 | 158.3 | 145.9 | |
Injection rate into air | g/s | 2435 | 2651 | 2876 | |
Screw rotation speed | rpm | 65 | |||
Clamping | Clamping force | KN | 70000 | ||
Max. platen distance | mm | 6700 | |||
Min. mold height | mm | 1500 | |||
Max. mold height | mm | 3500 | |||
Platen dimensions | mm | 4390 x 3790 | |||
Tie bar distance | mm | 3200 x 2600 | |||
Ejector force | KN | 1100 | |||
Ejector stroke | mm | 1200 | |||
General | Hopper capacity | L | 400 | ||
Pump motor power | kW | 303+18 | |||
Heat power | kW | 225 | |||
Dimensions (LxWxH) | m | 25.0 x 8.0 x 5.6 | |||
Machine weight | t | 550 |
Check other products

Tederic D650/i4800

Tederic DH1400/i13500

Tederic D350DL/i850 – 2-components