Huge mold capacity - modularized design for moving cylinder.
High rigidity and long platen shoes structure.
High rigidity clamping machine frame - independence and good rigid fixed supporting board avoid platen lean.
Pipeline layout in mode locked part.
High-performance control panel with humanized design touchscreen.
| Wtrysk | Screw diameter | mm | 75 | 80 | 85 |
| Screw L/D ratio | L/D | 23.5 | 22.0 | 20.7 | |
| Shot size | cm3 | 1785 | 2031 | 2292 | |
| Injection weight | g | 1624 | 1848 | 2086 | |
| oz | 57.28 | 65.18 | 73.58 | ||
| Injection pressure | MPa | 216.5 | 190.3 | 168.6 | |
| Injection rate into air | g/s | 373/429 | 424/488 | 479/550 | |
| Screw rotation speed | rpm | 167/193 (C) | |||
| Zamykanie | Clamping force | kN | 5500 | ||
| Max. platen distance | mm | 2100 | |||
| Min. mold height | mm | 400 | |||
| Max. mold height | mm | 1000 | |||
| Platen dimensions | mm | 1335 x 1335 | |||
| Tie bar distance | mm | 915 x 915 | |||
| Ejector force | kN | 182 | |||
| Ejector stroke | mm | 260 | |||
| Ogólne | Hopper capacity | L | 100 | ||
| Pump motor power | kW | 53+18 | |||
| Heat power | kW | 37 | |||
| Dimensions (LxWxH) | m | 8.3 x 2.3 x 2.3 | |||
| Machine weight | kg | 19000 | |||
Check other products
Tederic D350DL/i1900 – 2-components
Tederic D80/i210
Tederic D1800/J75000