Back
Two-platen injection moulding machine
Download technical data
Two-platen injection moulding machine
Tederic DH2700/i37000
clamping force: 2700 t
Download technical data 
Huge mold capacity - modularized design for moving cylinder.
High rigidity and long platen shoes structure.
High rigidity clamping machine frame - independence and good rigid fixed supporting board avoid platen lean
Pipeline layout in mode locked part.
High-performance control panel with humanized design touchscreen.
| Inject | Screw diameter | mm | 170 | 180 | 190 |
| Screw L/D ratio | L/D | 26.5 | 25.0 | 23.7 | |
| Shot size (theoretical) | cm3 | 22698 | 25447 | 28353 | |
| Injection weight | g | 20655 | 23157 | 25801 | |
| oz | 728.58 | 816.83 | 910.10 | ||
| Injection pressure | Mpa | 163.3 | 145.7 | 130.7 | |
| Injection rate into air | g/s | 1468 | 1646 | 1834 | |
| Screw rotation speed | rpm | 51 | |||
| Clamping | Clamping force | KN | 27000 | ||
| Max. platen distance | mm | 4100 | |||
| Min. mold height | mm | 800 | |||
| Max. mold height | mm | 1900 | |||
| Platen dimensions | mm | 2700 x 2620 | |||
| Tie bar distance | mm | 2000 x 1700 | |||
| Ejector force | KN | 560 | |||
| Ejector stroke | mm | 500 | |||
| General | Hopper capacity | L | 400 | ||
| Pump motor power | kW | 173+18 | |||
| Heat power | kW | 150 | |||
| Dimensions (LxWxH) | m | 16.7 x 5.0 x 3.9 | |||
| Machine weight | t | 128 | |||
Check other products
Tederic D280Db/p/M370+M210 – 2-components
Tederic D650/i4800
Tederic D800/J35500