Back
Two-platen injection moulding machine
Download technical data

Tederic DH1900/i17800
clamping force: 1900 t

Huge mold capacity - modularized design for moving cylinder.
High rigidity and long platen shoes structure.
High rigidity clamping machine frame - independence and good rigid fixed supporting board avoid platen lean.
Pipeline layout in mode locked part.
High-performance control panel with humanized design touchscreen.
Inject | Screw diameter | mm | 130 | 140 | 150 |
Screw L/D ratio | L/D | 26.9 | 25.0 | 23.3 | |
Shot size (theoretical) | cm3 | 9145 | 10606 | 12176 | |
Injection weight | g | 8322 | 9652 | 11080 | |
oz | 293.54 | 340.46 | 390.83 | ||
Injection pressure | Mpa | 194.8 | 168.0 | 146.3 | |
Injection rate into air | g/s | 923 | 1070 | 1229 | |
Screw rotation speed | rpm | 90 | |||
Clamping | Clamping force | KN | 19000 | ||
Max. platen distance | mm | 3450 | |||
Min. mold height | mm | 700 | |||
Max. mold height | mm | 1700 | |||
Platen dimensions | mm | 2500 x 2110 | |||
Tie bar distance | mm | 1850 x 1450 | |||
Ejector force | KN | 430 | |||
Ejector stroke | mm | 400 | |||
General | Hopper capacity | L | 200 | ||
Pump motor power | kW | 130+18 | |||
Heat power | kW | 93 | |||
Dimensions (LxWxH) | m | 13.1 x 4.0 x 3.16 | |||
Machine weight | t | 80 |
Check other products

Tederic D500/i3800

Tederic D2800/J100000

Tederic DH3500/i66600