Back
Two-platen injection moulding machine
Download technical data

Tederic DH1200/i9500
clamping force: 1200 t

Huge mold capacity - modularized design for moving cylinder.
High rigidity and long platen shoes structure.
High rigidity clamping machine frame - independence and good rigid fixed supporting board avoid platen lean.
Pipeline layout in mode locked part.
High-performance control panel with humanized design touchscreen.
Inject | Screw diameter | mm | 100 | 110 | 120 |
Screw L/D ratio | L/D | 24.2 | 22.0 | 20.2 | |
Shot size (theoretical) | cm3 | 4320 | 5227 | 6220 | |
Injection weight | g | 3931 | 4756 | 5661 | |
oz | 138.66 | 167.76 | 199.68 | ||
Injection pressure | Mpa | 220.2 | 181.9 | 152.9 | |
Injection rate into air | g/s | 618/756 | 748/915 | 891/1089 | |
Screw rotation speed | rpm | 94/115 (C) | |||
Clamping | Clamping force | KN | 12000 | ||
Max. platen distance | mm | 2600 | |||
Min. mold height | mm | 500 | |||
Max. mold height | mm | 1200 | |||
Platen dimensions | mm | 1730 x 1730 | |||
Tie bar distance | mm | 1175 x 1175 | |||
Ejector force | KN | 260 | |||
Ejector stroke | mm | 350 | |||
General | Hopper capacity | L | 100 | ||
Pump motor power | kW | 90+18 | |||
Heat power | kW | 63 | |||
Dimensions (LxWxH) | m | 11.0 x 3.5 x 2.85 | |||
Machine weight | t | 46 |
Check other products

Tederic D250/i1100

Tederic D1250/i9500

Tederic DH2100/i19700