
Tederic DE360/E1100
clamping force: 360 t

Toggle structure with 5 pins and self-lock, lead to smooth mold open/close. Structure self-lock after high-pressure clamping, lenghten the service life of clamping ball screw.
Diagonally designed ejection structure driven by servo motor, more tranquilly and precisely.
Utilization of cylindrical roller linear guide that up-level the parallelism between molds, and improve the cleanless circumstance around mold by lubrication-free on tie bar for its guider function has been replaced.
The central pressure created V-type toggle mechanism can remain consistent around the mold, keep the as low clamping force as possible.
One piece casting design - long service life, less spar part.
Screw driven by servo motor and transmission belt, flexible structure of tough adaptation.
Long service life by NSK ballscrew and bearing. Supported by the world leading supplier, ensure the reliability.
Inject | Screw diameter | mm | 50 | 55 | 60 |
Screw L/D ratio | L/D | 22 | 20 | 18.3 | |
Shot size | cm3 | 471 | 570 | 679 | |
Injection weight (PS) | g | 429 | 519 | 618 | |
oz | 15.13 | 18.30 | 21.79 | ||
Injection pressure | Mpa | 224 | 185 | 155 | |
Injection rate into air | cm3/s | 314 | 380 | 452 | |
Screw rotation speed | rpm | 300 | |||
Clamping | Clamping force | KN | 3600 | ||
Clamping stroke | mm | 710 | |||
Min. mold height | mm | 250 | |||
Max. mold height | mm | 720 | |||
Platen size | mm | 1160 x 1160 | |||
Tie bar distance | mm | 820 x 820 | |||
Ejector force | KN | 58.8 | |||
Ejector stroke | mm | 160 | |||
General | Hopper capacity | kg | 50 | ||
Total power capacity | kW | 50 | |||
Heat power | kW | 20 | |||
Dimensions (LxHxW) | m | 7.58 x 2.00 x 2.02 | |||
Weight | t | 21 |
Check other products

Tederic DH2100/i24000

Tederic D800/J35500

Tederic DE140/E360