-
| Injection | Screw Diameter | mm | 65 | 70 | 75 |
| Screw L/D Ratio | L/D | 23 | 22 | 20 | |
| Swept Volume | cm3 | 1161 | 1347 | 1546 | |
| Max. Shot Weight (P.S.)42.91z | g | 1057 | 1226 | 1407 | |
| oz | 37 | 42.91 | 49.25 | ||
| Max. Injection Pressure | bar | 2220 | 1910 | 1670 | |
| Max. Injection Rate | g/s | 250 | 290 | 333 | |
| Dry cycle time | s | 2.2 | |||
| Locking | Max. Locking Force | t | 400 | ||
| Max. Opening Stroke | mm | 750 | |||
| Min. Mould Height | mm | 280 | |||
| Max. Mould Height | mm | 750 | |||
| Max. Daylight | mm | ||||
| Space Between Tie Bars | mm | 730 x 730 | |||
| Max. Ejector Forward Force | t | 12 | |||
| Max. Ejector Stroke | mm | 200 | |||
| General | Pump Drive Motor | kW (KM) | 37 (49.62) | ||
| Hydraulic Pressure | bar | 175 | |||
| Heating Capacity | kW | 26 | |||
| Number of Heating Zones | qty | ||||
| Oil Filling | l | 740 | |||
| Machine Dimensions (LxHxW) | m | 7.55 x 1.62 x 2.03 | |||
| Machine Weight (dry) | t | 15 | |||
Check other products
Tederic D350DL/i1900 – 2-components
Tederic D3300/J224000
Tederic D800/J35500