Back
2-components Injection moulding machine
Download technical data
2-components Injection moulding machine
Tederic D350DL/i850 – 2-components
clamping force: 350 t
Download technical data 
-
| Injection | Screw Diameter | mm | 50 | 32 | |
| Screw L/D Ratio | L/D | 20 | 20 | ||
| Swept Volume | cm3 | 442 | 116 | ||
| Max. Shot Weight (P.S.) | g | 402 | 105 | ||
| oz | 14.07 | 3.68 | |||
| Max. Injection Pressure | bar | 1927 | 1923 | ||
| Max. Injection Rate | g/s | 157 | 102 | ||
| Dry cycle time | s | 2 | |||
| Locking | Max. Locking Force | t | 350 | ||
| Max. Opening Stroke | mm | 690 | |||
| Min. Mould Height | mm | 280 | |||
| Max. Mould Height | mm | 700 | |||
| Max. Daylight | mm | 690 | |||
| Space Between Tie Bars | mm | 680 x 680 | |||
| Max. Ejector Forward Force | t | 6.83 | |||
| Max. Ejector Stroke | mm | 160 | |||
| General | Pump Drive Motor | kW (KM) | 31 (41.57) | ||
| Hydraulic Pressure | bar | 175 | |||
| Heating Capacity | kW | 24.7 | |||
| Oil Filling | l | 750 | |||
| Machine Dimensions (LxHxW) | m | 6.6 x 1.8 x 2.28 | |||
| Machine Weight (dry) | t | 12 | |||
Check other products
Tederic D1500/J75000
Tederic D2800/J179000
Tederic D700/J24000