Tederic Large volume injection moulding machine D2800/J100000
| Inject | Screw diameter | mm | 120 |
| Piston diameter | mm | 340 | |
| Screw L/D ratio | L/D | 30 | |
| Shot size (theoretical) | cm3 | 137095 | |
| Injection weight | g | 98709 | |
| Injection pressure | Mpa | 78.9 | |
| Injection rate into air | g/s | 1894.5 | |
| Injection stroke | mm | 1510 | |
| Screw rotation speed | rpm | 91 | |
| Clamping | Clamping force | KN | 28000 |
| Clamping stroke | mm | 2050 | |
| Min. mold height | mm | 750 | |
| Max. mold height | mm | 1900 | |
| Platen dimension | mm | 2780 x 2700 | |
| Tie bar distance | mm | 2000 x 1750 | |
| Ejector force | KN | 554 | |
| Ejector stroke | mm | 470 | |
| General | Max. pump pressure | Mpa | 16 |
| Pump motor power | kW | 136.7 | |
| Heat power | kW | 165 | |
| Hopper capacity | kg | 400 | |
| Oil tank capacity | L | 4500 | |
| Machine weight | T | 205 | |
| Dimensions (LxHxW) | m | 19.00 x 5.79 x 3.75 |
Check other products
Tederic D2200/J75000
Tederic D280Db/p/M370+M210 – 2-components
Tederic D1050/i9500