-
| Injection | Screw Diameter | mm | 150 | 160 | 170 |
| Screw L/D Ratio | L/D | 23.5 | 22 | 20.7 | |
| Swept Volume | cm3 | 13943 | 15864 | 17909 | |
| Max. Shot Weight (P.S.) | g | 12688 | 14436 | 16297 | |
| oz | 444.08 | 505.26 | 570.4 | ||
| Max. Injection Pressure | bar | 1730 | 1520 | 1350 | |
| Max. Injection Rate | g/s | 1197 | 1362 | 1537 | |
| Dry cycle time | s | 11 | |||
| Locking | Max. Locking Force | t | 2200 | ||
| Max. Opening Stroke | mm | 1900 | |||
| Min. Mould Height | mm | 700 | |||
| Max. Mould Height | mm | 1600 | |||
| Max. Daylight | mm | ||||
| Space Between Tie Bars | mm | 1800 x 1620 | |||
| Max. Ejector Forward Force | t | 55.4 | |||
| Max. Ejector Stroke | mm | 400 | |||
| General | Pump Drive Motor | kW (KM) | 149 (199.81) | ||
| Hydraulic Pressure | bar | 160 | |||
| Heating Capacity | kW | 102 | |||
| Number of Heating Zones | qty | ||||
| Oil Filling | l | 2800 | |||
| Machine Dimensions (LxHxW) | m | 16800 x 3800 x 3420 | |||
| Machine Weight (dry) | t | 158 | |||
Check other products
Tederic D2200/J75000
Tederic D400/J8200
Tederic DH1200/i9500