-
| Injection | Screw Diameter | mm | 45 | 50 | 55 |
| Screw L/D Ratio | L/D | 22 | 20 | 18 | |
| Swept Volume | cm3 | 358 | 442 | 535 | |
| Max. Shot Weight (P.S.) | g | 326 | 402 | 486 | |
| oz | 11.41 | 14.07 | 17.01 | ||
| Max. Injection Pressure | MPa | 238.0 | 193.0 | 159.0 | |
| Max. Injection Rate | g/s | 127 | 157 | 190 | |
| Dry cycle time | s | 1.6 | |||
| Locking | Max. Locking Force | kN | 2000 | ||
| Max. Opening Stroke | mm | 540 | |||
| Min. Mould Height | mm | 220 | |||
| Max. Mould Height | mm | 560 | |||
| Max. Daylight | mm | ||||
| Space Between Tie Bars | mm | 530 x 530 | |||
| Max. Ejector Forward Force | kN | 60 | |||
| Max. Ejector Stroke | mm | 150 | |||
| General | Pump Drive Motor | kW (KM) | 20 (26.82) | ||
| Hydraulic Pressure | MPa | 17.5 | |||
| Heating Capacity | kW | 13 | |||
| Number of Heating Zones | qty | ||||
| Oil Filling | l | 300 | |||
| Machine Dimensions (LxHxW) | m | 5.49 x 1.54 x 1.90 | |||
| Machine Weight (dry) | kg | 6700 | |||
Check other products
Tederic D80/i210
Tederic DE360/E1100
Tederic DE85/E110