-
| Injection | Screw Diameter | mm | 130 | 140 | 150 |
| Screw L/D Ratio | L/D | 23.7 | 22 | 20.5 | |
| Swept Volume | cm3 | 9145 | 10606 | 12176 | |
| Max. Shot Weight (P.S.) | g | 8322 | 9652 | 11080 | |
| oz | 291.27 | 337.82 | 387.8 | ||
| Max. Injection Pressure | bar | 1950 | 1680 | 1460 | |
| Max. Injection Rate | g/s | 923 | 1070 | 1229 | |
| Dry cycle time | s | 9 | |||
| Locking | Max. Locking Force | t | 1800 | ||
| Max. Opening Stroke | mm | 1700 | |||
| Min. Mould Height | mm | 700 | |||
| Max. Mould Height | mm | 1560 | |||
| Max. Daylight | mm | ||||
| Space Between Tie Bars | mm | 1660 x 1660 | |||
| Max. Ejector Forward Force | t | 43 | |||
| Max. Ejector Stroke | mm | 400 | |||
| General | Pump Drive Motor | kW (KM) | 130 (174.33) | ||
| Hydraulic Pressure | bar | 160 | |||
| Heating Capacity | kW | 93 | |||
| Number of Heating Zones | qty | ||||
| Oil Filling | l | 2200 | |||
| Machine Dimensions (LxHxW) | m | 15050 x 3600 x 3240 | |||
| Machine Weight (dry) | t | 129 | |||
Check other products
Tederic D400/i2500
Tederic D130/i510
Tederic D2200/i24000