-
| Injection | Screw Diameter | mm | 42 | 45 | 50 |
| Screw L/D Ratio | L/D | 21 | 20 | 18 | |
| Swept Volume | cm3 | 287 | 329 | 406 | |
| Max. Shot Weight (P.S.) | g | 201 | 246 | 282 | |
| oz | 7.04 | 8.61 | 9.87 | ||
| Max. Injection Pressure | MPa | 213.0 | 185.0 | 150.0 | |
| Max. Injection Rate | g/s | 114 | 131 | 161 | |
| Dry cycle time | s | 1.5 | |||
| Locking | Max. Locking Force | kN | 1600 | ||
| Max. Opening Stroke | mm | 480 | |||
| Min. Mould Height | mm | 200 | |||
| Max. Mould Height | mm | 530 | |||
| Max. Daylight | mm | ||||
| Space Between Tie Bars | mm | 470 x 470 | |||
| Max. Ejector Forward Force | kN | 30 | |||
| Max. Ejector Stroke | mm | 150 | |||
| General | Pump Drive Motor | kW (KM) | 16 (21.46) | ||
| Hydraulic Pressure | MPa | 17.5 | |||
| Heating Capacity | kW | 10 | |||
| Number of Heating Zones | qty | ||||
| Oil Filling | l | 220 | |||
| Machine Dimensions (LxHxW) | m | 5.02 x 1.43 x 1.79 | |||
| Machine Weight (dry) | kg | 5200 | |||
Check other products
Tederic D2200/J100000
Tederic DH1900/i17800
Tederic D650/J24000