-
| Injection | Screw Diameter | mm | 35 | 38 | 42 |
| Screw L/D Ratio | L/D | 21 | 20 | 18 | |
| Swept Volume | cm3 | 168 | 199 | 243 | |
| Max. Shot Weight (P.S.) | g | 153 | 181 | 221 | |
| oz | 5.36 | 6.34 | 7.74 | ||
| Max. Injection Pressure | MPa | 228.0 | 193.0 | 158.0 | |
| Max. Injection Rate | g/s | 86 | 102 | 124 | |
| Dry cycle time | s | 1.3 | |||
| Locking | Max. Locking Force | kN | 1000 | ||
| Max. Opening Stroke | mm | 360 | |||
| Min. Mould Height | mm | 150 | |||
| Max. Mould Height | mm | 380 | |||
| Max. Daylight | mm | ||||
| Space Between Tie Bars | mm | 360 x 360 | |||
| Max. Ejector Forward Force | kN | 30 | |||
| Max. Ejector Stroke | mm | 120 | |||
| General | Pump Drive Motor | kW (KM) | 13 (17.43) | ||
| Hydraulic Pressure | MPa | 17.5 | |||
| Heating Capacity | kW | 6,6 | |||
| Number of Heating Zones | qty | ||||
| Oil Filling | l | 150 | |||
| Machine Dimensions (LxHxW) | m | 4.1 x 1.2 x 1.75 | |||
| Machine Weight (dry) | kg | 3200 | |||
Check other products
Tederic D2200/J100000
Tederic D600/i4800
Tederic D160/i600