New hydraulic injection molding machine
| Injection | Screw Diameter | mm | 32 | 36 | 40 |
| Screw L/D Ratio | L/D | 24.8 | 22.0 | 19.8 | |
| Swept Volume | cm3 | 145 | 183 | 226 | |
| Max. Shot Weight (P.S.) | g | 130 | 165 | 204 | |
| oz | 4,58 | 5,82 | 7,19 | ||
| Max. Injection Pressure | bar | 2505 | 1979 | 1603 | |
| Max. Injection Rate | g/s | 94 | 119 | 147 | |
| Screw Stroke | mm | 180 | |||
| Locking | Max. Locking Force | t | 100 | ||
| Max. Opening Stroke | mm | 345 | |||
| Min. Mould Height | mm | 150 | |||
| Max. Mould Height | mm | 400 | |||
| Max. Daylight | mm | 745 | |||
| Space Between Tie Bars | mm | 410 x 360 | |||
| Max. Ejector Forward Force | t | 3.44 | |||
| Max. Ejector Stroke | mm | 90 | |||
| General | Pump Drive Motor | kW (KM) | 15 (20) | ||
| Hydraulic Pressure | bar | 171 | |||
| Heating Capacity | kW | 4.6 | |||
| Number of Heating Zones | szt. | 3 + N | |||
| Oil Filling | l | 250 | |||
| Machine Dimensions (LxHxW) | m | 4.0 x 1.12 x 1.8 | |||
| Machine Weight (dry) | t | 4.0 | |||
Check other products
Lien Yu TF1800
Lien Yu TF1200
Lien Yu TF2300