New hydraulic injection molding machine LienYu
| Injection | Screw Diameter | mm | 70 | 75 | 80 |
| Screw L/D Ratio | L/D | 23.6 | 22.0 | 20.6 | |
| Swept Volume | cm3 | 1424 | 1635 | 1860 | |
| Max. Shot Weight (P.S.) | g | 1282 | 1471 | 1674 | |
| oz | 45,22 | 51,89 | 59,05 | ||
| Max. Injection Pressure | bar | 2226 | 1940 | 1705 | |
| Max. Injection Rate | g/s | 403 | 463 | 527 | |
| Screw Stroke | mm | 370 | |||
| Locking | Max. Locking Force | t | 520 | ||
| Max. Opening Stroke | mm | 760 | |||
| Min. Mould Height | mm | 320 | |||
| Max. Mould Height | mm | 900 | |||
| Max. Daylight | mm | 1660 | |||
| Space Between Tie Bars | mm | 810 x 760 | |||
| Max. Ejector Forward Force | t | 16.63 | |||
| Max. Ejector Stroke | mm | 225 | |||
| General | Pump Drive Motor | kW (KM) | 78 (100) | ||
| Hydraulic Pressure | bar | 171 | |||
| Heating Capacity | kW | 22.0 | |||
| Number of Heating Zones | szt. | 5 + N | |||
| Oil Filling | l | 1000 | |||
| Machine Dimensions (LxHxW) | m | 8.5 x 2.1 x 2.25 | |||
| Machine Weight (dry) | t | 20.0 | |||
Check other products
Lien Yu TF160
Lien Yu TF420
Lien Yu TF220